1800vw   Case & Cyl. Parts

Go Back

Start Page

Parts Book
Photos & # 

Page Links

Parts For 
Sale Listing

Align Bore Case

Bearing Dem.

Case Savers

Cam Dur. & Lift

Cam Tool in Place

Cut Cases for 92's

Fan Housing 
& Parts

Head Torque

Bearing Problems

Oil Leaks

Oil Temp & Pressure

Torque Info.

Year & Chassis Numbers

Q&A  
Lower end check

Q&A 
Check Crankshaft

*Torque Wrench

* Rear Seal HD

*Gear Puller

*Gasket Sealer

*Motor Cooling Tin

*Valve & Guide Part Numbers

Purchase with
PayPal

  

       01/11/03

 

 

 

 

 

 

 

 

 

 

 


See-> second page of Case Parts  for Parts not shown on this View

We will list accurate Part Numbers to the best of our ability but we do not say they are 100% correct.
So use them at your own risk. If you find a wrong part number please let us know.

Note: VW often made changes in the 8th month so if you have a 1968 made before Aug. it might be the same as a 1967....... Part numbers starting with a "V" are Vic,s part numbers. vw@vwhelp.com  We will put VW part numbers in place as they are available.

Many Parts are available but not listed yet. Shown in Gray ->  order  >  E-mail for price

1-- #043 101 487...Valve Cover Retainer Clip...Stock... order
1-- #V101 411B...Valve Cover Bale "Chrome" for Stock VC...order
1-- #V101 451B...Valve Cover Bale "Chrome" for Cast Alum. VC...order

2-- #113 101 475B...Valve Covers "Stock"...
2-- #V105 118...Chrome Stock type Valve Covers...order
2-- #V105 116...Valve Covers...Cast Aluminum Clip-On's...order
2-- #V009 152...Valve Covers...Cast Alum. Bolt-On...order
.....#V009 086...Installation Kit for Bolt on Valve Covers...order
2-- #V008 852...Valve Covers...Deep Cast with "C" type gasket...order $39.95

3-- #113 101 481...Valve Cover Gasket Stock...order
3-- #V008 868.. Valve cover "C" type used on EMPI style (#2) #V008 852...order

4-- #113 101 399B...Rocker Shaft Stud...8mm x 10mm x 62mm (...1300 to 1600cc...order $2.98
4-- #V101399B...Rocker Shaft Stud long 40 HP...8mm & about 5" long 1200cc  order $4.75

5-- #111 101 451...Spark Plug Insert...14mm x 1/2" reach...12/1600cc...order 
    Note: We do not recommend Helicoil inserts for Spark Plugs

6-- #311 129 707..."O" ring Intake gasket 1.5" dia. 1500/1600cc...order $.65
6-- #.........................."O" ring Intake gasket 1 3/8" dia 1300cc...order
6-- #N 13 823 1..."O" ring Intake gasket...28mm x 34mm...1 1/8" dia. 40 hp 1200cc. order 
6-- #N 13 821 2...26mm x 32mm Intake Manifold 25 & 36 hp...

7-- #311 198 069F...Piston & Cylinder Kit... 85.5 mm...1600cc...ck  price ?  26# order $189.95
7-- #311 198 063J...Piston & Cylinder Kit... 83 mm...1500cc...ck  price ?  26#
7-- #111 198 057...Piston & Cylinder Kit...77 mm...ck  price ?  26# 

8-- #V1015NL... 10 x 1.5 mm...Nut...order 

9-- #N 14 525 1...Case to Tran Stud...10 x 1.5 x 85mm long...order $1.00

10-- #V107015B...Case to Tran. Bolt...10 x 70 x 1.5 mm...when Nut is used
10-- #VN1015... Case Insert Nut... Pressed in Nut insert on left side on Late cases
10-- #111 199 101...Half Moon Starter Bolt Std. Tran. 10x110mm..(4.33") 13/1600cc order $3.75
10-- #111 199 103...Half Moon Starter Bolt Std. Tran. 10x70mm..(2.750")12/1600cc order $2.95

11-- #043 101 025...Crankcase, Dual Oil Relief...w/rear hanger for T2/T3...13/1600cc...
11-- #113 101 025...Crankcase, Dual Oil Relief...No rear hanger for T2 or T3...
11-- #211 101 025...Crankcase, Dual Oil Relief...T1/T2 only 13/1600cc...
11-- #043_______...Crankcase, New AS-41 Brazilian case used in Mex. Bug...
    Not the AS-41 case is made to use the new Larger bore Hyd. Lifters but due to the small dia. head it is not recommended for use with high lift cams.

12-- #__________...Case Bolt 8mm with Nut & Washer...

13-- #__________...Case Stud 8mm...

14-- #113 101 157C...Cam Plug...65-69...order $.80
14-- #040 101 157...Cam Plug  "New" type Plastic/Rubber. order $2.95

15-- #VCS65...Case Stud 12mm x 6.5" long...(6)...

16-- #113 101 125...Sealing "O" ring for Crankcase Stud 13/1600cc...order 

17-- #113 101 211G...Pedestal Alt.Gen...with 105 mm Gen.or Alt. order
17-- #V101211...Pedestal Alt.Gen...with 105 mm Gen.or Alt... Chrome order $22.95
17A-- #113 101 221B...Oil Deflector plate...order $.85
17B-- #113 101 211G...Gasket Gen/Alt Pedestal...order 

18-- # N 11 008 2 ... 8mm Nuts (4) order $.21
18-- # N 12 228 2 ... 8mm Wavy Washer (4) order $.05

19-- # N 11 008 2 ... 8mm Nut & paper gasket  * This is where we recommend using a Oil pump 8mm sealing nut # 111 115 161 instead of paper.

20-- #113 115 611...Dip Stick...Stock...12/1600cc...
20-- #V115 601...Chrome Dip Stick...
20-- #V009 055...Chrome +2" longer...

21-- #113 115 6312...Oil Dipstick Tube...order $5.95

22-- #V009 523...Nut Kit for complete Engine...Long Block...order $17.95

23-- #N 11 008 2...Nuts 8mm (_ ) case Nuts...order $.21
23-- #N 12 228 2...Spring Washer for 8mm case nuts...order

24-- #N 11 062 4...Oil Sump Cap Nuts...6mm...(6)...order $.30

25-- #________...Oil Sump Plate studs...(6)...order
25-- #N 14 402 1...Oil Sump Step Stud...6mm to 8mm...order $.75
      The striped 6mm hole is correct size to be taped for American 1/4-20

26-- #111 198 541...Cam Bearings Std...13/1600cc... Q&A on Cam bearings->*Click  order $8.95
26-- #111 198 541HD...Double Thrust Came Bear...Use with very high lift cams & dual springs.order $10.95
26-- #111 198 542..Oversize Cam Bearings for 28.0 mm(1.102") OD case. order $17.95
        Note: Cam bearing bore = 1.082 / 1.085" ( Bore gets smaller not larger with time ) *ck
 
27-- #__________...8mm studs for case 1/2...

28-- #__________...8mm studs for case 1/2...

29-- #111 115 161...8mm Self Sealing Oil Pump Nuts...(4)...
29-- #111 115 159...6mm Self Sealing Oil Pump Nuts...(4)...
.
30-- #N 14 396 1...8mm Oil Pump Studs..8 x 50mm(1.969")...(4).
30-- # 6mm Oil Pump Studs...6 x __...(4)...

31-- #_______...Case Bolt...8mm x ___...

32-- #N 14 502 1...Head Stud 10 x 1.5 x 204mm(8")...Top Outer DP & SP
32-- #N 14 505 1...Head Stud 10 x 1.5 x 188mm(7.4")...Top Center DP.
32-- #N 14 506 1...Head Stud 10 x 1.5 x 240mm(9.5" to 9 3/8")...Lower DP & SP
32-- #V8X7250......Head Stud 10 x 1.5 x 178mm(7" to 7.5")...Top 40hp
32-- #V8X9375......Head Stud 10 x 1.5 x 228mm(9")...Lower 40hp can use 9 3/8"   Case Saver-> *ck      Q&A Case Studs for 1835cc motor-> *ck
32-- #VC1279........Head Stud Set 10mm DP Chrome Moly....10mm x 1.5mm order $79.95
32--#040 198 035D...Head Stud Set 8mm D.P.... 8 x 1.25mm order $19.95

32-- #043 101 457...Head Nut for all 8 x 1.25mm Studs...order $.55
32-- #021 101 457...Head Nut for all 10 x 1.5mm Studs... order $.72

32-- #043 101 465...Washer for all 8mm head Studs...
32-- #111 101 465...Washer for all 10mm Head Studs 10 x 1.5mm...

33-- #311 101 341...Cylinder Base Gasket paper...90 x 99mm(3.898")...13/1600cc...
33-- #113 101 341...Cylinder Base Gasket paper...87 x 90mm(3.425")x(3.543")...40hp...

34-- #311 119 317A...Air Deflector under Cylinders...60-79.  See cooling tin -->click  order $2.25
34-- #113 119 451D...Super Tin under cylinder...13/1600cc...order $7.95

35-- #111 101 343A...Gasket Cyl. Head 36hp...84(3.307") x 88.2(3.472")...copper to 7/60...
35-- #113 101 343A...Gasket Cyl. Head 40hp...90(3.543") x 94.2(3.707")...copper...8/60-12/62...

36-- #N 11 008 12...Ex Nut Copper Locking...8mm with 12mm head...order $ .30
36-- #043 101 457L...Ex Nut Copper...8mm with 13mm head...order $ .35
36-- #N 11 008 CL...Ex Nut Long Brass...8mm...

36-- #N 14 443 8...Ex Stud 8 x 1.496" long...Stock.
36-- #N 14 483 2...Ex Step Stud...8mm x 10mm x 38mm(1.496") long...order $1.20

37-- #311 101 373...Single Port Head...New Stock..1500/1600cc..
37-- #311 101 373X...Single Port Head...Rebuilt sold exchange...15/1600cc  order
37-- #113 101 371X...40 hp Head Rebuilt 1200cc
37-- #113 101 353E...40 hp Late Head...w/square rocker support...1200cc...
37-- #V36H......36 hp Head Bare New.. order $100.00
                       Valves and Valve Guides-->*Click
38-- #021 101 457...Head Nut for all 10 x 1.5mm head studs.
38-- #043 101 457...Head Nut for 8 x 1.25mm head studs
38-- #N 11 008 2...Nuts 8mm (4 ) case Nuts...
38-- #040 198 035...Head Stud Set 8mm D.P. (8 x1.25mm)
38a-- #043 101 465...Washer for 8mm head studs

39-- #311 101 355C...DP Cylinder Head...New...No Step...1600cc...
39-- #311 101 355...DP Cyl. Head Bare...New...No Step...1600cc..
39-- #113 101 355AC..DP Cyl. Head.. W/Step...New...1600cc...
39-- #043 101 355...Dual Port Head...Stock New...1500/1600cc...
39-- #113 101 375...Dual Port Head...Stock New...1500/1600cc...
39-- #113 101 375X...Dual Port Head Stock Rebuilt exch. 15/1600cc. order
........Valves and Valve Guides *ck 
40-- #311 198 169AB...Piston Ring Set...2x2x5mm...85.5mm...order $19.95
40-- #311 198 169A...Piston Ring Set...2x2x5mm...85.5mm...order $19.95
40-- #311198169M...Piston Ring Set...1.75x2x5mm...85.5mm...order $21.95

40-- #111 198 257B...Piston Ring Set...2x2x4mm...83mm...1300cc...order $26.95
40-- #311 198 163...Piston Ring Set...2.5x2.5x__...83mm...1500cc...order $24.95
40-- #315 198 163A...Piston Ring Set...2x2x4mm...83mm...1500cc...order $14.95

40-- #111 198 157B...Piston Ring Set...2x2x4mm...77mm...1300cc...order $26.77
40-- #311 198 183...Piston Ring Set...1.5x1.5x4mm...83mm...Big-Bore... 40hp...order $26.95

40-- #111 198 157A...Piston Ring Set...2.5x2.5x4mm...1 pc oil ring...77mm...order $26.77

40-- #311 198 187...Piston Ring Set...1.5x1.5x5mm...87mm Big-Bore...order $17.95
40-- #311 198 16987...Piston Ring Set...2x2x5mm...87mm Big-Bore...order

40-- #311 198 188...Piston Ring Set...2x2x5mm...88mm... Big-Bore...order 
40-- #311 198 188BX...Piston Ring Set...1.5x1.5x5mm...88mm Big-Bore...order $24.95
40-- #311 198 188BB...Piston Ring Set...2x3x5mm...88mm... Big-Bore...order $19.95
        Information on cutting cases for Big-Bore Cylinders -> *click
40-- #V1484...Piston Ring Set...2x2x4mm...90mm...Big-Bore.. order  $24.95

40-- #311 198 1905B...1.5x2x4mm...90.5mm...Big-Bore...order $28.95
40-- #311 198 1905...2x2x4mm...90.5mm...Big-Bore...order $24.95

40-- #311 198 16992...2x2x4mm...92mm...Big-Bore...order $24.95
40-- #V1996...1.5x2x4mm...92mm...Big-Bore...order 

40-- #V1995...1.5x2x4mm...94mm...Big-Bore Rings...
40-- #311 198 194BB...2x2x4mm...94mm...Big-Bore Rings...
      Bore & Stroke cc chart->*Click-----Calculator-> Deck Height & Compression Ratio-> *Click
41-- See # 7 above for stock 1200, 1300, 1500 and 1600cc P&C Kits

41-- #V87...Big Bore P&C Kit...87mm Kit...Slip In...ck  current price ?  26# order $149.95
41-- #_________...Big Bore P&C Kit...88mm Kit...Machine Case type...  26#
41-- #V88...Big Bore P&C Kit...88mm Kit...Slip In...ck  price ?  26# order $189.95
41-- #_________...Big Bore P&C Kit...90mm Kit...26#
41-- #V905...Big Bore P&C Kit...90.5mm Kit...ck  price ?  26# order $189.95
41-- #V105167...Big Bore P&C Kit... Forged...90.5mm Kit...ck  price ?  26# order 
41-- #V90582...Big Bore P&C Kit... 90.5 x 82 stroke... 26# order $189.95
41-- #V92...Big Bore P&C Kit...92mm ... ck  price ?  26# order $189.95
41-- #V105169...Big Bore P&C Kit... Forged...92mm ...ck  price ?  26# 
41-- #V92821SS...Big Bore P&C Kit...Forged...92 x 82 stroke... ck  price ?  26# order 
41-- #VF94...Big Bore P&C Kit...94mm x 69 stroke...ck current price ?  26# order

42-- #111 101 123...Main Bearing Dowel Pin...36hp to 2000cc...order $ .50

43-- #113 101 131A...Nut, Self Sealing 12 x 1.5 mm...order $ .98

44-- #043 101 129...Flat Washer Case Stud 12.2 x 22 mm...8/60-on...

45-- #__________..."O" Case Sealing between case half's...order

46-- #VCS65......Case Stud...12x1.5mm x 6.5" long...

47-- #071 101 062...Case Dowel Pin...8x25mm...12/1600cc...60-79...order 

Crank Page->*Click--- Valves & Cam-->*Click--- Main Bearings List & Info.->*Click--- Bore & Stroke cc chart->*Click--- Calculator->Deck Height & Compression Ratio->*Click---  How to check if the Pistons & Cylinders need replacing->*Click--- Motor Cooling Tin->*Click --- Information on cutting cases for Big-Bore Cylinders -> *click

  Go Back

   Victor Comp. Products Inc. **--Vic's--**  Phone 816-650-3535 • 230 S Hudson St., Buckner, Missouri, 64016, US 
Click here to Contact Webmaster