Go Back

Start Page

Parts Book
Photos & # 

Page Links

Cooling Fan

Flywheel Puller

Oil Temp & Pressure

Running Hot

Torque Info.

Q&A
Lower end ck

Purchase with
PayPal

     02/11/03*

Note: Motor Tin shown is for late model 1600cc T-1 engine, See Part number for years it is used on.
Buggies: All cooling tin above the centerline of the cylinders must be used, cooling tin below center of cylinders is not normally used, Except part number 27 which must be used for proper cooling of cylinders.

 We will list accurate Part Numbers to the best of our ability but we do not say they are 100% correct.
  So use them at your own risk.  If you find a wrong part number please let us know.

Note: VW often made changes in the 8th month so if you have a 1968 made before Aug. it might be the same as a 1967....... Part numbers starting with a "V" are Vic,s part numbers. vw@vwhelp.com   We will put VW part numbers in place as they are available.

3--#211 119 903B...Single Port Cylinder Tin Set 13-1600cc "Left" order
3--#113 119 304G...Single Port Cylinder Tin Set 13-1600cc "Right" order

4-- #

5-- #113 119 543Z...Seal Kit for Doghouse Exit Ducts

6-- #N115571...6mm Flat Washer (6FW) order

7-- #N107144...6x12mm Cooling Tin screw no/washer
7-- #N107142...6x12 mm Cooling Tin screw w/washer order

8--#113 119 419...Oil cooler Lower Exit Duct  used w/doghouse cooler #113 117 021...1971-79 order
           
9-- #N115571...6mm Flat Washer (6FW) order

10-- #N10210.1...6mm Bolt. order

11-- #113 119 431...Oil cooler Upper Air Exit Duct used w/doghouse oil cooler 1971-79 order

12-- #N115571...6mm Flat Washer (6FW) order

13-- #...N10210.1...6mm Bolt. order

14-- #...

15-- #113 119 571...rubber Plug

16-- #113 119 V2...Lower Pulley tin All T-1 order

17-- #N107144...6x12mm Cooling Tin screw no/washer                 
17-- #N107142...6x12 mm Cooling Tin screw w/washer order

18-- #N115571...6mm Flat Washer (6FW) order

19-- #113 119 517R... Engine Firewall cover plate T-1 8/60-7/70
19-- #113 119 517S... Engine Firewall cover plate T-1 & SB  8/70-7/74

20-- #N20092.1...Grommet for Accelerator tub 

21-- #N20091.1...Grommet for Metal Fuel Line:

22--#

23-- #113 119 543Z...Seal Kit for Doghouse Exit Ducts

24-- #311 119 357...Air Deflector plate Left rear "shown".8/61-7/73  Located below cylinder order
24-- #131 119 358A...Air Deflector plate Right rear "not shown" 8/61-7/73   order   

25-- #N107144...6x12mm Cooling Tin screw no/washer
25-- #N107142...6x12 mm Cooling Tin screw w/washer order

26-- #N115571...6mm Flat Washer (6FW) order

27-- #311 119 317A...Air Deflector tin...8/60-7/79 (can be used on all T-1 motors) Note: This is  he best air Deflectors for Buggies & Off Road cars as it does not collect & hold dirt. order
27-- #113 119 451D...Air Deflector tin (used on some SB) cools cylinders slightly better but traps dirt.... some books show  Left #126 119 461 & Right #126 119 462 used w/out heat exchangers. order
28-- #N107144...6x12mm Cooling Tin screw no/washer
28-- #N107142...6x12 mm Cooling Tin screw w/washer order

29-- #

30-- #043 119 351B...Heater Channel splash tin, Right Lower side #1 & #2 cylinders 8/61-7/73 order

31-- #N115571...6mm Flat Washer (6FW) order

32-- #N107144...6x12mm Cooling Tin screw no/washer
32-- #N107142...6x12 mm Cooling Tin screw w/washer order

33-- #N107144...6x12mm Cooling Tin screw no/washer
33-- #N107142...6x12 mm Cooling Tin screw w/washer order

34-- #N115571...6mm Flat Washer (6FW) order

35-- #113 119 533H...Brest Plate, Below crankshaft pulley. 13-1600cc thru-7/70 order

36-- #

37-- #

38-- #N115571...6mm Flat Washer (6FW) order

39-- #N107144...6x12mm Cooling Tin screw no/washer
39-- #N107142...6x12 mm Cooling Tin screw w/washer order

40-- #113 119 571...Grommet 25mm carb preheat hose for 38mm hole

41-- #

42-- #113 119 523...Rear Eng Cover Tin "With NO Holes" 13-1600cc
42-- #113 119 523C...Rear Eng Cover Tin as above but w/Manifold Heat 13-1600cc
42-- #113 119 523D...Rear Eng Cover Tin, Fresh Air, w/Manifold Heat & carb pre-heat
42-- #113 119 523E...Rear Eng Cover Tin, Fresh Air, w/o manifold heat & carb pre-heat
42-- #113 119 523F...Rear Eng Cover Tin, Fresh Air, w/manifold heat, w/o carb pre-heat

43-- #113 119 585B or A...Grommet, Fresh Air Hose Thru rear engine cover.

44-- #

45-- #

46-- #

47-- #

48-- #N107144...6x12mm Cooling Tin screw no/washer
48-- #N107142...6x12 mm Cooling Tin screw w/washer order

49-- #N115571...6mm Flat Washer (6FW) order

50-- #043 119 350B...Heater Channel Tin (set of 2) Lower left #3 & #4 cylinders 8/61-7/73 order

51-- #043 119 350B...Heater Channel Tin (set of 2) Lower left #3 & #4 cylinders 8/61-7/73 order

52-- #

53-- #

54-- #

55-- #

56-- #N115571...6mm Flat Washer (6FW) order

57-- #

58-- #211 119 577...Protection Plate, Right Pre-Heat Pipe T-1&2 12/62-7/73 order   
58-- #211 119 578...Protection Plate, Left Pre-Heat Pipe T-1&2 12/62-7/73 order

59-- #N115571...6mm Flat Washer (6FW) order

60-- #N107144...6x12mm Cooling Tin screw no/washer
60-- #N107142...6x12 mm Cooling Tin screw w/washer order

61-- #113 119 599A...Gasket Cover for heat riser (large): order

62-- #113 119 597...Half round gasket, Rear manifold pre-heat pipe T1 12/62-8/73 & T2 12/61-7/71
62-- #113 119 599...Half round gasket, Front manifold pre-heat pipe T1 12/62-7/73 & T2 12/61-7/73

63-- #

64-- #

65-- #

         Case & Cylinders--> *Click*

         

  Go Back

   Victor Comp. Products Inc. **--Vic's--**  Phone 816-650-3535 • 230 S Hudson St., Buckner, Missouri, 64016, US