|
|
| 1800vw
Flywheel
Puller
|
||
|
|
|
|
|
Every time you remove your flywheel without a flywheel puller you are wallowing
out the dowel holes. Picture shows what happens the first time you pry the flywheel off, next time its
wallowed out in a different direction. Pulling an 8-dowell flywheel leaves 8-dowels
wallowed instead of 4 bad holes. Make this Flywheel puller with an old pressure plate, One nut & Bolt, and 3-pcs of scrap steel and never wallow out the dowel holes again. |
|
|
|
Over-size 11/32" dowels to repair Crank & Flywheel -- order Long 8mm dowels used when 8-doweling crank -- order Stock 8mm dowels -- order Crank Drill Jig for 8-Doweling Crank & Flywheels -- order Go Back Victor Comp. Products Inc. **--Vic's--** Phone 816-650-3535 • 230 S Hudson St., Buckner, Missouri, 64016, US |
||
