1800vw   Swing Axle Suspension Parts
Go Back

Start Page

Parts Book
Photos & # 

Page Links

Parts For 
Sale Listing

Brake Shoes
and Pads

Suspension

I.R.S. Suspension

*IRS weld 
in Pivots

*Spring Plate Stops

*Spring Plate Retainers

*Wheel Studs
 & Race Nuts

Purchase with
PayPal

    2/02/03*

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

We will list accurate Part Numbers to the best of our ability but we do not say they are 100% correct.
So use them at your own risk. If you find a wrong part number please let us know.

Note: VW often made changes in the 8th month so if you have a 1968 made before Aug. it might be the same as a 1967....... Part numbers starting with a "V" are Vic,s part numbers..vw@vwhelp.com.. We will
put VW part numbers in place as they are available.

Many Parts are available but not listed yet. Shown in Gray ->  order  >  E-mail for price

1-- #111 501 201A...Axle Shaft, Rear, L/R...49-66... 26 5/8" long order
1-- #311 501 201D...Axle Shaft, Rear, L/R...67-68... 28 3/8" long order
1-- #VLSA...Axle S.A. Left side... 26 5/8" long...up to 1966 order recycled $27.97 
1-- #VRSA...Axle S.A. Right side...26 5/8" long...up to 1966 order recycled $37.97 
1-- #VLLA...Axle S.A. Left side...28 3/8" long...1966 -1968 order recycled $27.97 
1-- #VRLA...Axle S.A. Right side...28 3/8" long...1966 - 1968 order recycled $32.97 
1-- #111 501 201A --- Axel L or R 1949-66 order
1-- #311 501 201D --- Axel L or R 1967-68 order
1a-- #113 517 191...Fulcrum Plate (fits on each side of axle flats)... up to 7/68 order 
1a-- #113 517 193...Fulcrum Plate Oversize (fits on each side of axle flats)... up to 7/68 order

2-- #____...Axle Tube Assy...Rt side for short axle...up to 1966
2-- #____...Axle Tube Assy...Left side for short axle...up to 1966
2-- #____...Axle Tube Assy...Rt side for long axle...1966 - 1968
2-- #____...Axle Tube Assy...Left side for long axle..1966 - 1968

3--...Gaskets for setting end play included in gasket set #111 398 005A order

4-- #_______...Axle Tube Retainer Flange "Stock stamped steel"

5-- #113 501 159...Large boot clamp order

6-- #111 501 153B...S.A. Boot...w/clamps... stock black order 
6-- #111 598 021A...S.A. Boot Kit... w/clamps...German order $5.95
6-- #V009974...S.A. Boot...(set of 4) order $12.95

7-- #111 501 159B...Small boot clamp order $ .59

8-- #211 501 191..Rubber bumper stop (2 required) 58-79 order 

9-- #VSWP______...Taper Pin

10-- #311 501 169B...Outer Axle Tube bearing casting w/shock mount order recycled $32.97 

11-- #311 598 051...Gasket Kit also includes #14, #16, #19 order

12-- #VASS................Axle spacer...OD=1.690" / ID=1.185" / .255" thick & inside radius goes in $4.07

13-- #311 501 283...Bearing order $11.95

14-- #113 501 291A..."O" ring seal...OD=2 7/8" x .105" order

15-- #............................Spacer (not used) 

16-- #111 501 296..."O" ring seal...OD=1.225" x .135" between bearing & Spacer order

17-- #VSAS..............Spacer...OD=1.750" / ID=2.185" / .555" to .610" thick & outside bevel goes out. and the outside diameter must be perfectly smooth for seal to last. order recycled $5.95 
18-- #113 501 315...Seal ( also comes in kit #311 598 051 order ) open side towards trany.

19-- #.............Shim...OD=1.750" / ID=1.180" & .020" thick (in Kit #311 598 051 order)

20-- #V1015...Set of 4 bolts (10 x 1.5 x 40mm or 1 1/8" long ) order recycled $3.07 

21-- #VRBC...Bearing Cap (Several different ones used - Match depth to old one) order

22-- #113 501 615K... 4-lug brake drum 8/67-on  9 1/8" ID & 2.1/2" spline length order
23-- #111 501 221...Axel nut (non-flanged) use 36mm socket & torque to 245 ft lbs. order $3.57
........#AC000141...36mm Socket with 1/2" drive *check*

24-- #N12 548 1.......Cotter Key 1 1/8" to 2 1/5" long and approximate  .190 dia. order $ .20

25-- #113 501 615D..Brake Drum... 5-Lug. 57 - 7/67 order  9 1/8" ID & Spline length of 2 1/2" 
25-- #311 501 615E...Drum...T-3...5-Lug  8/63-7/65 order 9 13/16" I.D. & Spline length of 2 1/2"
 25-- #181 501 615A...Drum..Thing...5-Lug order 

26-- #V104015HB... 10x40x1.5mm...Hex bolt but with small head needed for clearance. order $0.60

27-- #VTCO...............Spring plate cap order recycled $6.07 
27-- #V511101..........Spring Plate Caps (set of 2 ) Chrome order
27-- #113 511 227A --- Cap w/o hole L or R 1960-69 & 1949-52 order

28-- #V510001..........Spring Plate Grommet 50-67 outer knobby.. 1 7/8"ID order
28-- ...........................Spring Plate Grommet ..........outer round..... order

29-- #V510001..........Spring Plate Grommet...inner knobby...1 7/8"ID orderr
29-- #311 598 245 --- Spring Plate Grommets (set of 4) 1960-68 order

30-- #VUSP...............Spring Plate order recycled $35.07 
30-- #111 511 205B --- Spring Plate, L or R --- 1960-68 order

31-- #VTBS................Torsion Bar 21 3/4" long 60-68 order recycled $38.97 
31-- #V501 300..........Torsion Bars 26mm x 21 3/4" long  order

32-- #VSWT...............Torsion Housing cut from S.A. Pan order
  Note: We recommend always using the IRS torsion housing when building a car then you can use S.A. or IRS transmission.   Convert your old Swing Axle to an IRS torsion.  order

33-- #V128015HB...Shock bolt 12x80x1.5mm or 12mm x 3 1/8" long order $ .98

34-- #113 513 031G...Shock Rear Stock 1/54 - 7/68 order
34-- #KG5529..............Shock Rear Gas KYB order
34-- #AC513 001B...Shock Rear Coil Over  order

35-- #V1215N...............Nut for Shock 12mm order $0.75
35-- #V1215NL............. Nylock 12mm Self locking nut order $ .80

Spring Plate Stops-->*ck --- Swing Axle Transmission Parts Page-->*Click ---  Spring Plate Retainers...Chrome-->*ck --- S.A. Tips-->*ck  --- R-Suspension-->*Click   ---  IRS Parts-->*Click  ---  Weld in IRS pivots to convert SA to IRS->*ck


  Go Back          <-- Good reason to use Spring Plate Retainers

   Victor Comp. Products Inc. **--Vic's--**  Phone 816-650-3535 • 230 S Hudson St., Buckner, Missouri, 64016, US