1800vw
IRS Parts
|
|
|
1-- #VTBL.... Torsion Bar--68-70 IRS--22mm--22 9/16" long order recycled $22.07 1-- #VTBS... *....."........."...--60-68 SA--21 3/4" long order recycled $38.97 1-- #V501 300...Torsion Bars H.D. 26mm--21 3/4" long order 1-- #V235...Torsion Bar...23.5mm...26 9/16" long order recycled $69.97 1-- #VTBB....*....."........."...--T2 __-__---18.75" Long (This is used 2" wider x 3" longer Trailing Arms) 1-- #VTBBE...Torsion Bar...23 1/4"...T-2...up to 68 order recycled $39.77 Note: Rt & Left Do not switch sides--Can use 21 3/4" bars in IRS with special spring plates. For more information on Spring Plates and how to adjust them -> *Click 2-- #V510001..* Spring Plate Grommet--68-79--IRS Inner Knobby--1 7/8" I.D. order 2-- #V510002...*....."........."..........".......--59-60--S.A. inner round--1 7/8"I.D. order 2-- #V510001...*....."........."..........".......--61-67--S.A. inner knobby--1 7/8" I.D. order 2-- #111 598 245E --- Spring Plate Grommets -- 69-79 (Set of 4) order 3-- #VSSP...Spring Plate (single plate)--IRS order recycled $29.97 3-- #VDSP...Spring Plate (dual plate)--IRS order recycled $29.97 3-- #VUSP......."........."....60-67--S.A. order recycled $35.07 3-- #V4959......."........."....49-59--S.A.--(use w/24 11/16" bars) order 4-- #V510002...*Spring Plate Grommet--68-79--IRS Outer Round--1 7/8" ID order 4-- #V510001...*...."........."..........".......--50-60--S.A. outer knobby--1 7/8" I.D. order 4-- #V510001...*...."........."..........".......--61-67--S.A. outer knobby-- 1 7/8" I.D. order 4-- #V510003...*Spring Plate Grommet for Adj. spring plates inside-- 2" I.D. order 5-- ......................Spring Plate Caps 68-79 5-- #V009569...*........"........."........."...............Dual or single plate Chrome Caps order $18.95 6-- #VTAB...Trailing Arm Pivot Bolt (14x1.5mm threads) 87ft lbs.-order recycled $8.95 7--#VUSW...Trailing Arm Bolt Washer .160 thick order recycled $1.58 7-- ......................."........"......".........".......quantity & location is used to set toe-in 8-- #211 501 121...Trailing Arm Pivot Bushings (2-rubber & 2-Steel) order recycled $3.97 8-- #V530020...*............"........."........"...........".......Aftermarket Urethane H.D...order ......Trailing Arm are also called Control Arm = Same thing...We have a Special Jig to Check if straight or bent. 9-- #113 501 504G...#VRTA...Trailing Arm--68-79 RT--(__for single plate) order recycled $69.97 9-- #113 501 503G...#VLTA...Trailing Arm--68-79 Left--(__for ingle plate) order recycled 9-- #VRTA4...Trailing Arm--4-Bolt--(Dual plate) Right order recycled $69.77 9-- #VLTA4...Trailing Arm--4-Bolt--(Dual plate) Left order recycled $69.77 ......Note: There are two different bolt patterns. One for single plate and a different pattern for the Dual plates. > They are not interchangeable. Weld in pivots to convert S.A. to IRS --> *ck 10-- #311 501 191...*#V511110...Control Arm Rubber stop. order $9.95/2 11-- #VRS...Inner Axle spacer (Seal I.D. contacts )...1.750" O.D. x 1.184" I.D. x .394" thick $4.25 12-- #113 501 315G...Inner Axel seal order 13-- #VTASR...Control Arm inner snap ring 2.600" free dia. x .075" thick ( behind seal ) recycled $2.00 14-- #113 501 283...Inner Control Arm Axle bearing 2.440" O.D. x ____ thick "Ball Bearing" order $8.95 15-- #VBS19...Axle Spacer between Bearings...2.240" x 1.5" O.D. x 1.190" I.D. hardened recy $5.07 16-- #V113609...Plastic Emergency Brake cable holder "snaps in" order recycled $1.00 17-- #113 501 277A...Outer Control Arm Axel Bearing "Roller" order $12.95 18-- #311 598 051...Large "O" ring ( Part of Seal Kit order) 19-- #..........................Small "O" ring ( Part of seal Kit order ) 20-- #VRBC...Bearing Cap ( several different ones ck bearing depth in cap ) order 21-- #VRSS...Outer Axel Spacer (Seal surface).1.750" O.D x 1.184" I.D.- .475" thick recycled $4.97 22-- #113 501 315G...Outer Axle Seal---(also in seal kit #311 598 051 order ) 23-- #V1015...Bearing Cap Bolts-10x30-1.5mm-- ( 4 ) --torque to 43 ft lbs. "14mm head" order 23a-- #N12 228 2...8mm Spring Washer...order 23b-- #N11 558 1...8mm Flat Washer...order 24-- #113 501 615J...Rear IRS brake drum 4-hole. 9 1/8" ID & 2 1/2" Spline length order $30.95 24-- #311 501 615F... T-3 4-lug brake drum 2-pc 8/65-on 9 13/16" ID order $29.95 24-- #311 501 581... T-3 Rear Drum Hub. "Not Shown" with 2 1/2" Spline length order $18.95 24-- #311 501 615E... T-3 Rear 5-Lug Drum "Not Shown" 2 1/2" Spline length order 24-- #181 501 615A... Thing Rear 5-Lug Drum "Not Shown" 2 1/2" Spline order 25-- #311 501 221...Rear Axle Nut ( use 36mm socket or 1 7/16" socket ) 24x1.5mm...order Torque to 217'# / 255 ft lbs. recheck in 500 miles 26-- -#N125481...Cotter Key Large order $0.20 27-- #V128015HB...Upper Shock Bolt--12x80-1.5mm--3 1/8"-- with 17mm head order $0.98 27a-- #V1215NL...Nylock 12-1.5mm self locking nut...order $ .60 28-- #113 513 031N...Rear IRS Shock order ....... #KG5529...*KYB Gas Shock 47-79 order 29-- #127015HB...Lower Shock Bolt--12x70-1.5mm--2 3/4" long --17mm head order 29a-- #V1215NL...Nylock 12-1.5mm self locking nut order $0.60 30-- #VAXELT1...Rear Axle 16 3/8" long Recycled ( for standard T-1 IRS Transmission ) recycled $22.95 30-- #113 501 211...Rear Axle 16.358" or 415.50mm long (New) 30-- #V16316...Rear Axle 16 3/16" long Recycled ( 3/16" shorter then std. e-mail for availability ) $32.95 30-- #VAXELT2...Rear Axle T-2 18 3/4" long Recycled ( for standard T-2 IRS Transmission ) $47.95 ......16 3/16" & 18 3/4" (I think these were for Auto-Tan Bugs) Let me know if this is correct. 31-- #113 501 229D...CV Bolt ( Special 8x46mm ) (6) / CV order $ .65 31a-- #113 501 229C...CV Bolt...8mm Allen...not always available, used on T2 31b-- #N15 371 1...CV Bolt Washer...Special Hard Locking-(6) / CV -Torque to 25 ft lbs 32-- #VCVP...CV bolt Plate (3) / CV order recycled $ .67 33-- #113 501 149...CV Axle Boot with Flange order $4.95 33-- #321 498 201A...CV Boot Kit ( German w/bolts & grease ) order $11.95 34--Washer ( cupped spring washer ) remove if present "Do not use"-- 35-- #113 501 331D...CV "Constant Velocity Joint" order 35a-- #_________ CV Grease 3.2oz of molybdenum grease per joint. order 35b-- #GML14...CV Grease 14oz Tube molybdenum grease order $7.25 36-- #113 517 279...CV axle circlip (2) / Axle order $1.00 37-- #VUSA...Stub Axle -Order- 37a- #VUSAA...Stub Axle Kit (Stub Axle/2-bearings/3-spacers/Nut >*ck -Order- 38--Grease cup used in some CVs 39--CV large clamp 40--Old type CV Boot without flange 41--Small CV boot clamp ( We don't recommended using this clamp, Let it Float ) Swing Axle-->*Click Rear Suspension-->*Click S.A. Transmission-->*Click Go Back Victor Comp. Products Inc. **--Vic's--** Phone 816-650-3535 • 230 S Hudson St., Buckner, Missouri, 64016, US |