1800vw   Front End Parts 

Go Back

Start Page

Parts Book
Photos & # 

Page Links

Parts For 
Sale Listing

Brake Shoes
and Pads

Link Pin Shims

*Alum. Wheels

*Wheel Studs &
Race Nuts

SB Front Suspension

Long Travel
Shock Mount

Purchase with
PayPal

      02/24/03*

 

 

 

 

 

 

 

 

 

 

We will list accurate Part Numbers to the best of our ability but we do not say they are 100% correct. So use them at your own risk. If you find a wrong part number please let us know.

Note: VW often made changes in the 8th month so if you have a 1968 made before Aug. it might be the same as a 1967....... Part numbers starting with a "V" are Vic,s part numbers..vw@vwhelp.com.. We will put VW part numbers in place as they are available.

Many Parts are available but not listed yet. Shown in Gray ->  order  >  E-mail for price

"Not Shown"-- #129015HB...4-bolts that bolt Front End to pan. 12mm x 90mm x 1.5mm bolts

1-- #111 405 691...Grease Dust cap... Right (2.065"OD without spedo drive hole)...54-7/65...order
1-- #111 405 692........"..........."......".......Left side (2.065"OD w/spedo. drive hole)...order

2-- #111 405 671...Spindle Nut...Right hand threads...54-7/65...requires (2)...order
2-- #111 405 672.........".........".....Left hand threads...54-7/65...requires (2)...order

3-- #111 405 681...Lock plate...54-7/65...order

4-- #111 405 671...Spindle Nut...Right hand threads...54-7/65...requires (2)...order
4-- #111 405 672.........".........".....Left hand threads...54-7/65...requires (2)...order

5-- #111 405 661...Spindle nut thrust washer...54-7/65...order

6-- #111 405 645A...Outer Ball Bearing...46-7/65 Note: inner & Outer must be the same type...
6-- #111 405 625A...Ball Bearing Inner...46-7/65...ID=.985"xOD=2.440"x.750"
6-- #111 405 627...Roller Bearing Inner...46-7/65...Replacement for 111 405 625A above order
6-- #111 405 647...Roller Bearing Outer...46-7/65...Replacement for 111 405 645A above order
6-- #311 405 625...Roller Bearing Inner...8/65-6/68...order
6-- #311 405 645...Roller Bearing Outer...8/65-12/77...order
6-- #311 405 625D...Roller Bearing Inner...6/68-12/77...order 
6-- #211 405 625...Roller Bearing Inner T-2 65-79 ... order
6-- #211 405 645D...Roller Bearing Outer T-2 64-80...  order

7-- #113 405 615A...Brake Drum (5 Hole)...1/54-7/65...order

8-- #111 405 625A...Inner Ball Bearing ...46-7/65...ID=.985"xOD=2.440"x.750"
8-- #111 405 645A...Ball Bearing Outer...46-7/65... 552mm
8-- #111 405 627...Roller Bearing Inner...46-7/65...Replacement for 111 405 625A above order
8-- #111 405 647...Roller Bearing Outer...46-7/65...Replacement for 111 405 645A above order
8-- #311 405 625...Roller Bearing Inner...8/65-6/68...order
8-- #311 405 645...Roller Bearing Outer...8/65-12/77...order
8-- #311 405 625D...Roller Bearing Inner...6/68-12/77...order
8-- #211 405 625...Roller Bearing Inner T-2 65-79... order
8-- #211 405 645D...Roller Bearing Outer T-2 64-80... order

9-- #111 405 641A...Seal KP 1/49-7/65...40x62x11.5mm order
9-- #131 405 641A...Seal BJ Drum 8/65-1/68...38x52/56x7.5/9mm order
9-- #111 405 641B...Seal BJ Drum 1/68-8/79...order
9-- #311 405 641A...Seal BJ Disc 8/66-5/68...order
9-- #311 405 641B...Seal BJ Disc 6/68-7/77...order
9-- #211 405 641D...Seal T-2 8/63-79...50x65x8mm

10-- #VSPU...Inner Spacer that Seal rides on. .585" thick x 1.575" OD. x .985" ID. w/large bevel inside.
        Q&A on welded spacer-> *Click  order
11-- #111 405 301...Spindle Left Side...59-65 order
11-- #113 405 301...Spindle Left Side...To fit late Brake Drums (4 or 5 hole)...8/65- order
11-- #111 405 302...Spindle Right Side... order
11-- #113 405 302...Spindle Right Side...To fit late Brake Drums (4 or 5 hole)...8/65- order
11-- #111 405 301D...Spindle Right Side...Disc Brake Type _up to 7/65 order
11-- #111 405 302D...Spindle Right Side...Disc Brake Type _up to 7/65 order

12-- #..........................Small Pin that holds spacer in Place...
12a-- #VKPS.. Steel Spacer...(hard to find)...order $6.50

13-- #111 498 021...King Pin Rebuild Kit (for both sides)...1/54-7/65...(2 lbs) order
....................................Requires Special Reamer to install...
   Note: When replacing the KP's, the LP's # 14 will normally need replacing.
13-- #211 498 041A...Link Pin Set...T-2 Bus 8/63-7/67 (1 set required per vehicle) order

14-- #111 498 051...Link Pin Kit...adj. with enclosed shims...1/54-7/65...(3 lbs) order
14-- #211 498 041A...Link Pin Set...(1 set required per vehicle) T2 64-67 order
14-- #211 405 356...T2 64-67 King Pin w/lower Link Pin Bushings L or R 
14-- #211 405 317B...T2 62-67 King Pin Bushings Lower 62-67
14a-- #___ ___ ___ ...Pinch Bolt to Adjust Link Pins Note these should be retightened after some running time.

15-- #111 405 351...Link...Left Side...order
15-- #111 405 352...Link...Right Side...order

16-- #N18 515 1...Grease Zerk fittings...6mm Straight...order
16-- #N18 523 1...Grease Zerk 6mm...45 degree...order
16-- #N18 516 1...Grease Zerk 8mm... used on some King Pin ft beams...

17-- #111 405 105D...Torsion Arm...Top...

18-- #111 405 151C...Torsion Arm...Lower...

19a-- #111 411 151...Torsion Bar Screw...order
19-- #111 411 151...Torsion Bar Screw Lock Nut...order

20-- #111 413 403A...Top Shock Bolt. Early type had step w/taper lock. Not available ??
20-- #111 413 403A...Top Shock Bolt.. Straight 12-1.75-65mm...order

21-- #113 413 031B...Shock Absorber to Ch. 115 999 000...order
21-- #KG4521...KYB HD Shock...order
21-- #V513 001...Coil Over Shock...adjustable...order

22-- #111 401 273...Rubber Stop...order $2.00
22-- #V413 103...After Market HD Stop (Sold in Pr's)...order $12.95

23-- #V1015N...10x1.5...Nut for lower Shock...or V1015NL...Locking Nut...order

24-- #111 411 027...Torsion Bars Top or Bottom...order

25-- #111 401 315...Fiber/Bakelite Bushing... 1.770" O.D. x 1.455" I.D. T1 49-64 & Ghia 56-64
25-- #111 401 301...Needle Bearing...Outer... 1.812" O.D. x 1.455" I.D."
25-- #V413 109...Outer Replacement for Stock Fiber Bushings... 1.770" O.D. x 1.455" I.D.
25-- #V104 246...Outer Replacement for Stock Needle Bearings... 1.812" O.D. x 1.455" I.D.
25-- #V413 108... Inner & Outer one piece Bushings for Aluminum Front ends (4-pcs)
....................Front End Bushings -> Question w/Answer ->*Click order
26-- #111 411 027...Torsion Bars Top or Bottom...Same as #24...order

27-- #111 400 025...Axle Beam...Bare w/8 Bearings...order
27-- #V401 001...Aluminum Front End w/Shock Towers...order
27-- #V401 000...Aluminum Front End (No Shock Towers)...order
..................Front End Bushings -> Question w/Answer ->*Click
28-- #N18 515 1...Grease Zerk 6mm Fitting (4) per car...order
28-- #N18 516 1...Grease Zerk 8mm...used on some K.P. Beams...order
28-- #N 018 516 1-2 Grease Nipple 8 x 1 mm 
28-- #N 018 530 1-2 Grease Nipple 10 x 1 mm 

29-- #111 401 315...Fiber/Bakelite Bushing...See #25...
....................Front End Bushings -> Question w/Answer ->*Click
30-- #113 405 615A...Brake Drum (5 Hole)...1/54-7/65...order
30-- #111 405 615B...Brake Drum (4 Hole)... 8/67-12/77...order

31-- #131 405 641A...Oil Seal Fr. Ch. 116 000 001 to 118 857 239...order
31-- #111 405 641B...Oil Seal Fr. Ch. 118 857 240...1/68-8/79...40x62x11.5mm 

32-- #113 405 311E...Left Spindle...Shoe Brake...order
32-- #113 405 312E...Right Spindle. Shoe Brake...order

33-- #111 405 131...Upper Seal...(2) required...order
33-- #131 405 131...Upper Seals...Some parts books give this number...

34-- #131 405 129...Lower Seal...(2) Right and Left side...order

35-- #VOBJT... Top Outer Bearings...1.___ O.D. x 1.455" I.D.order
35-- #111 401 315... Top Inner Bushings... 1.770" O.D. x 1.455" I.D.
35-- #AC413110......Urethane Bushing Kit (outer 4 only)...The outer ones are normally the only  ones  that go bad....order.......Front End Bushings -> Question w/Answer ->*Click 
36-- #VOBJB...Lower Outer Bearing...1.___ O.D. x 1.690" I.D. order
36-- # 111 401 315...Inner Bushing... 1.770" O.D. x 1.455" ID.

37-- #131 411 107A...Torsion Leaf Set...order
37-- #USBT...Torsion Leaf Set "Recycled"... order 27.95
38-- #131 411 107A...Torsion Leaf Set... order
38-- #USBT...Torsion Leaf Set "Recycled"... order 27.95


39-- #113 401 021D...BJ Front Axle Beam w/Bearings...order
39A--#113 401 021AK...BJ Beam Repair Kit (not shown) repairs the area between the upper & lower  tubes... T1 66-78 & Ghia 66-74 order "One set does one side" welding required.

40-- #111 411 151...Torsion Bar Grub Screw...49-79 T1,2,3 & Thing order
 
41-- #111 411 151...Torsion Bar Grub Screw Lock Nut...order

42-- #131 498 441...Shock Extension Bolt Kit...Required on Early stock Shock...order

43-- #113 413 031E...Shock Absorber Fr CH. 116 000 001...8/65-12/77...order
43-- #113 413 031EU...Shock Does not require Bolt Kit...order
43-- #V413 001...........Coil Over Adjustable Shock...order
43-- #V413 006...........Ft Shock for Lowered Ft. Ends...order

44-- #............................Shock Nut Lower BJ...
44-- #............................Shock Self Locking Nut...Nylock...

45-- #131 405 361F...Ball Joint Upper... Question w/Answer Removing Ball Joints ->*Click   order

46-- #131 405 319...Camber Adjuster...Mark location before removing...order

47-- #411 513 481...Nut-12mm Self-Locking...Ball Joint...

48-- #411 513 481... Nut-12mm...Same as #47...

49-- #113 405 311E...Spindle Left Side...8/65-78...order
49-- #113 405 312E...Spindle Right Side...8/65-78...order

50-- #131 405 151A...Torsion Arm Lower Left...8/65-12/77Q&A Removing Ball Joints ->*Click  order
50-- #131 405 152A...Torsion Arm Lower Right...8/65-12/77...*Reconditioned Arms sold exchange order

51-- #131 405 103A...Torsion Arm Upper Left...8/65-12/77... Q&A Removing Ball Joints ->*Click order
51-- #131 405 104A...Torsion Arm Upper Right...8/65-12/77...*Reconditioned Arms sold exchange orderr
52-- #111 411 151...Torsion Bar Screw...order
52a-- #111 411 151...Torsion Bar Screw Lock Nut.. order

53-- #N18 515 1...Grease Zerk fittings...6mm Straight...Most BJ ft ends...order

54-- #131 405 371G...Boll Joint Lower...66-on... Q&A Removing Ball Joints ->*Click  order

55-- #131 411 309...Stabilizer Bar, Front 66-79 Std. order

56-- #111 498 101A...Stabilizer Mounting Kit..Fr. Ch. 116 000 001...order

57-- #113 609 139...Ft. KP Backing Plate...52-58...
57-- #113 609 139A...Ft. KP Backing Plate...57-64... 
57-- #V609 139.........Backing Plate Left... BJ Shoe Brakes...

57-- #.............................Backing Plate Left...BJ Disc Brakes...
57-- #.............................Backing Plate Right...BJ Disc Brakes...

58-- #.............................Backing Plate Bolt...

59-- #311 405 641A...Seal Disc Brake...8/66-5/68...1.400"x2.060"x.250" order
59-- #311 405 641B..Seal Disc Ch.118857240->6/68-7/77.1.5"x2.055"x.340"...order                                
59-- #111 405 641A... Seal KP 1/49-7/65...40x62x11.5mm order
59-- #131 405 641A...Seal BJ Drum 8/65-1/68...38x52/56x7.5/9mm order
59-- #111 405 641B...Seal BJ Drum 1/68-8/79... order
59-- #211 405 641D...Seal T-2 8/63-79...50x65x8mm 

60-- #311 405 625...Inner Taper Roller Bearing ...8/65-6/68... order
60-- #311 405 625D...Taper Roller Bearing Inner...6/68-12/77... order
60-- #111 405 625A...Ball Bearing Inner...46-7/65...ID=.985"xOD=2.440"x.750" 
 60-- #111 405 645A...Ball Bearing Outer...46-7/65... 552mm
60-- #111 405 627...Roller Bearing Inner...46-7/65...Replacement for 111 405 625A above order
60-- #111 405 647...Roller Bearing Outer...46-7/65...Replacement for 111 405 645A above order
60-- #311 405 645...Roller Bearing Outer...8/65-12/77...ID=.687" OD=.1.570" order
60-- #211 405 625...Roller Bearing Inner T-2 65-79 order
60-- #211 405 645D...Roller Bearing Outer T-2 64-80 order

61-- #...........................Brake Rotor BJ ...

62-- #311 405 645...Outer Taper Roller Bearing ...8/65-12/77....689"IDx1.571"ODx.580" order
       62--  See #60 above for complete listing. 

63-- #311 405 661...Thrust washer...8/65-12/77...order

64-- #131 405 669...Locking Nut...Left side...order
64-- #131 405 670...Locking Nut...Right Side...order

65-- #111 405 691B...Spindle Cap Left Side......1.900"ID w/speedometer drive Hole order $2.50
65-- #111 405 692B...Spindle Grease & Dust Cap..1.900"ID Right Side order $2.50

66-- #V412 006...Stock Super Beetle Springs...Set of 2 .... order 
66-- #V412 005...Hi-Perf Super Beetle Springs...Set of 2 ...
66-- #V412 004...Lowered Strut Springs...Set of 2...

67a-- #113 412 303... SB Strut Stop ...up to 7/73...order
67a-- #113 412 303A...Strut Upper Stop...SB up to 73...order
67a-- #133 412 303A...Strut Upper Stop...SB 74-On...order

67-- #V266 102A...Strut Assembly...recycled 3-bolt 8/70-73 order
67-- #V266 103A...Strut Assembly...recycled press in 73-79 order
67-- #V412 000...Lowered Strut Super Beetle 71-73...pr...
67-- #V412 001...Lowered Strut Super Beetle 74-79...pr...

67-- #113 412 031D...Strut Insert Fr. Ch 133 3003 656...8/70-7/73...3-Bolt...order
67-- #133 412 031B...Strut Insert Fr.Ch 133 3003 656...8/73-8/79...Clamp...order
67-- #V412 002...Lowered Strut Insert Super Beetle 71-73...pr..
67-- #V412 003...Lowered Strut Insert Super Beetle 74-79....order

68-- #113 407 361E...Ball Joint Super Beetle...8/70-7/73...3-Bolt...order
68-- #133 407 361...Ball Joint Super Beetle..8/73-8/79...Clamp...order

69-- #VTARM...Track Arm Forged Steel...8/70-7/73...recycled order
69-- #VTR74...Track Arm Stamped Steel Welded...8/73-8/79...recycled order

70-- #..........................Self Locking Nut...

71-- #113 407 311E...Spindle...Left...3-Bolt...8/70-7/73...recycled order
71-- #113 407 312E..Spindle...Right... 3-Bolt...8/70-7/73...recycled order


71-- #VLSBSK...Spindle...Left...8/73-8/79...order
71-- #VRSBSK...Spindle...Right...Clamp Type...8/73-8/79...order 

72-- #...........................Backing Plate Left Side...
72-- #...........................Backing Plate Right Side...

73-- #...........................Backing Plate Bolt...

74-- #311 405 641A...Oil Seal (For Disc Brakes)...8/66-5/68...1.400"IDx2.060"ODx.250" order
74-- #311 405 641B...Seal Disc. Brakes Fr. Ch 118 857 240...6/68-7/77...order
        See  #9 & #59 for KP & BJ front ends seals.

75-- #311 405 625D...Inner Taper Roller Bearing Ch 118 857 240...6/68-12/77...order
75-- #311 405 645...Taper Roller Bearing Outer...8/65-12/77...order
75-- #111 405 625A...Ball Bearing Inner...46-7/65...ID=.985"xOD=2.440"x.750"
75-- #111 405 645A...Ball Bearing Outer...46-7/65... 552mm
75-- #111 405 627...Roller Bearing Inner...46-7/65...Replacement for 111 405 625A above order
75-- #111 405 647...Roller Bearing Outer...46-7/65...Replacement for 111 405 645A above order
75-- #311 405 625... Roller Bearing Inner...8/65-6/68...order
75-- #211 405 625...Roller Bearing Inner T-2 65-79 order
75-- #211 405 645D...Roller Bearing Outer T-2 64-80 order

76-- #113 405 615D...Brake Drum...SB 70-7/72 order $29.95 
76-- #113 405 615H...Brake Drum...SB 89/72-on order $34.95

77-- #311 405 645...Outer Taper Roller Bearing ...8/65-12/77....689"IDx1.571"ODx..580"
        See #75 above complete bearing listing order

78-- #311 405 661...Thrust Washer...8/65-12/77...order

79-- #131 405 669...Spindle Locking Nut...Left Side...66-79...order
79-- #131 405 670......."............"............".... Right Side...66-79...order

80-- #131 405 691...Dust Cap Left Side with spedo. cable drive hole...1.900"ID order
80-- #131 405 692...Dust Cap Right Side........1.900"ID order

 Question w/Answer Setting the Toe In ->*Click --- Front End Bushings -> Question w/Answer-->*Click ---Tie Rods & Steering-->*Click --- Brake Lines Parts Page ->*Click --- Lower KP Shock Mount--> *ck

  Go Back

   Victor Comp. Products Inc. **--Vic's--**  Phone 816-650-3535 • 230 S Hudson St., Buckner, Missouri, 64016, US