|
Go Back
Start
Page
Parts
Book
Photos & #
Page
Links
Case &
Cyl. Parts
Case Information
Cooling Tin
Torque Info.
Torque Wrench
1/31/02*
|
First Torque the head nuts to 7'#
in the sequence shown in view
#1
Next torque 8mm studs to 18 foot lbs.
10mm studs to 22-23 foot lbs.
using sequence #2
It is very important
to torque head studs properly so don't guess at it
and be sure you have
an accurate Torque wrench.
Don't forget to install the cooling tin.
above
the Push Rod tubes.
They can not be installed afterwards.
|
How
to check if the Pistons & Cylinders need replacing->*Click
Information on cutting cases for Big-Bore
Cylinders -> *click
|
|
