1800vw

	#1= Super Shifter "Chrome" w/grease fittings #V798700 = $69.95 order #2= Buggy Shift Box to use stock bushing #5 #V0031 587 = $9.95 order #3= Stock VW shift bracket (spot welded in place) #111 701 255B = $5.95 #4= Stock Reverse Lock Out Plate #211 711 149 = $2.65order #5= Shift shaft bushing #111 701 259A = $1.50order --- Information ---#1 shifter has positive reverse lock out button & bronze bushing for positive shifts & long life. "Beware: If you drive a VW w/one of these you will have to have one" #3 Stock shift bracket is spot welded in tunnel. #4 Reverse Lock out plate installed w/large curved ramp Up & on Right. #5 Bushing must be in good shape for shifter to work properly.
	#1= Universal Chrome .590" ID - #V425160C = $24.95 order See Super Shifter Shift Tubes *ck #2= Super Shifter Connector - #V798700C = $9.95 order #3= Shift Rod Adjuster - #V710002 = $7.95 order #4= Splined end "weld on" .590" OD - #V425164 = $3.95 order ---- Information ----- #1 slides over the stock dia. .590" dia. Tran. shift lever (hockey stick) which is the same dia as #4 & the small end of #3. #2 is bored to 1/2" ID and the other end is taped 7/16-20 Large end of #3 = .750" same as ID of Bug shift tube.
	#1 early 2-hole nose cone & late #2 S.B. will interchange. The 3-hole is less likely to brake. Use this mount when switching. #3 Late model shift couplings inserts are most durable. #4 Shift coupling 64-79 used with stock shift tube. #5 Nose cone bushing with shift shaft seal holder. #6 Replacement shift shaft seal for #5 #7 Needle bearing for shift shaft "must modify nose cone" #8 Nose cone bushing ".810" long" #9 Nose cone bushing stock short. #10 Shift shaft or hockey stick #11 Shift coupler screws for early or late couplers. #12 Early shift coupler 50-62 used with aftermarket shift rods..5#
#1-- 113 301 205G - Nosecone with 2-hole mount used on Bug/Ghia 61-72 = $47.95 order #2-- VSBNC - Recycled Nosecone with 3-hole mount (S.B. Tran.) = $30.75 order #V3M - Solid front mount for using 3-bolt nose cone with standard 2-bolt torsion. *ck = $17.95 #3-- 823 711 477 - Shift coupler inserts "late hard plastic HD inserts" = $5.00 set of 2 order #4-- 311 711 245 - Shift coupler assy. 8/63-79 = $8.95 order #5-- ................... - Shift Bushing with seal holder = (not presently available) #6-- 001 301 227 - Nose cone seal .955" OD x .590"ID (15-24-7mm) = $1.75 order #7-- FJ 1512 - Nose cone needle bearing ..590" ID x .830" OD x .475" long = $3.95 order #8-- 111 301 207 - Nose Cone Bushing .590" ID x .675" OD & 13/16" long = $2.95 order #9-- 111 301 207X - Nose cone Bushing .590" ID x .707" OD & 15/32" long = $2.95 order #10-- 113 311 541C - Shift shaft or sometimes called hockey stick = $9.95 order #11-- 211 711 189A - Set Screw for all shift rod couplers = $.95 each order #12-- 111 711 175B - Shift coupler 46-8/63 = $8.95 (used with adjuster #3 above) order
Shift Shaft information -> *ck order